How often do you clean up your pool ? When’s the last time you cleaned your pool? I mean cleaned it. Maybe your pool need to clean right now, but you don’t want to do that right now, because cleaning the pool isn’t nearly as fun as swimming in it, isn’t it?
However, decorating your kitchen and cleaning the pool regularly is necessary. Contributing a touch of time each week in keeping your swimming pool clean is superior to anything sitting tight for multi month then you don’t have to do much work. Putting the maintenance off will cost you a lot more time in the end.
How to Maintain Your Pool Yourself
You can do that work, remove the dirt by using a standard vacuum cleaner. I know that there is an automatic cleaner, but when you’re dealing with a low, green infestation, manual pool vacuuming is pretty much required to fight the little water squatters.
Swimming Pool Vacuum Cleaner
A swimming pool vacuum is a quick and easy way of cleaning up debris that can be found in your pool. There are two types of pool vacuums, and they are a manual pool vacuum and an automatic pool vacuum, also known as an automatic pool cleaner.
A manual pool vacuum means that you need to involve in the work, you have to move the vacuum around the pool area much like vacuuming a floor rug. While an automated pool cleaner is suitable for you, who don’t want to spend much time the vacuum. It will minimize your work because it has an automatic drive mechanism and power source to move around the pool area to pick up the dirt.
There are three types of automatic pool vacuums: robotic, pressure, and suction. Robotic pool cleaner is a sophisticated technology that usually requires a more substantial upfront investment and not cheap maintenance.
How to Use a Pool Vacuum?
Using a pool vacuum makes the task of cleaning the floor of the pool easier. Here we will deal with the manual vacuum cleaner. What do we need? A vacuum head, a telescopic pole to attach to the vacuum head, a long vacuum hose to reach every area of your pool, a skim vacuum or vacuum plate (if needed), you can also use of your pool filter to make the task a little easier.
If you do the pool cleaning weekly, you may not need to adjust the filter, the standard filter setting will do the job nicely. but let say that you have a lot of the debris in the pool after the thunderstorm, then you will need to adjust the filter before you begin vacuuming to clear a large amount of debris.
- Fist find best tools for clean out your pool at above ground pool reviews.
- After you find the best tools, make sure that the pump and filter are running.
- Attach the manual vacuum cleaner head to one end of the telescopic pole.
- Attach one end of the vacuum hose to the vacuum head. Use a hose clamp to keep it in place if you find the slippery hose.
- Then slide the floating hose onto the suction point of the vacuum cleaner.
- Hold the pole in your hand, then put the vacuum cleaner in the corner of the swimming pool and lower the vacuum head into the pool together with the hose.
- Next, hold the vacuum cleaner hose at the water line. Drive the hose down beneath the water line vertically until the point when you achieve the finish of the hose. This will push water through the hose and drive all the let some circulation into. In the event that you don’t do this, your swimming pool pump will be harmed.
- If you have finished attach the vacuum cleaner hose, you can connect it to the vacuum cleaner connector or the skimmer. Or you can use a Skim vac for this if you want. Then you can leave the filter basket in place.
- To make the vacuum running well, make sure the entire suction power goes to the vacuum cleaner connection point. You may need to close certain pipes temporarily.
- Now, you are ready to clean the pool.
How to Vacuum a Pool?
Cleaning the pool is going to take some time, so don’t make another plan this afternoon. Do the work carefully and correctly until you are sure that it is spotless. Now, after you are done for the vacuum cleaner, let’s vacuum the pool. Don’t do this in a hurry.
Go to the floor of the swimming pool with the vacuum cleaner and suck up the dirt. Moving around the pool and try to stir up the other dirt as little as possible. Begin at the shallow end and gradually advance toward the profound end of the pool. Utilize long, moderate, clearing strokes to clean.
If you have got that the suction power of the vacuum cleaner is reduced, backwash the sand filter. This will clean the sand filter and bring back the excellent suction power, and you can continue cleaning the pool.
After the floor of the swimming pool is clear, backwash again the filter and reset it to the original position. Remove the manual vacuum cleaner and the floating hose and reset the ball valves to their original position. Now, it’s time for swimming!
Sometimes you will find white scale on the wall of the swimming pool at the water line. You can clean it quickly by using a sponge and HTH Borkler Gel. Let the water level drop a few centimeters. Put the gel on the sponge and rub it over the limescale on the water line. Then wait for a few minutes to let the product works, then rinsing it off with the swimming pool water. Then top the pool water up again. This product is safe, so you can still carry on swimming immediately.
Not only clean the pool, but you also need to keep the water quality healthy, so you need to add maintenance products to the swimming pool. Keep the PH balance, and it should be between 7.0 and 7.6, with an ideal value of 7.2.
You can also add chlorine to the water as disinfected against bacteria. The ideal chlorine value for an outdoor pool in the garden is 1mg/l.